beautypg.com

Fuses – Acura 2000 TL - Owner's Manual User Manual

Page 276

background image

Fuses

Checking and Replacing Fuses

If something electrical in your car
stops working, the first thing you
should check for is a blown fuse.
Determine from the chart on pages

275

and

276

, or the diagram on the

fuse box lid, which fuse or fuses
control that component. Check those
fuses first, but check all the fuses
before deciding that a blown fuse is
not the cause. Replace any blown
fuses and check the component's

operation.

1. Turn the ignition switch to LOCK

(0). Make sure the headlights and

all other accessories are off.

2. Remove the cover from the fuse

box.

BLOWN

3. Check each of the large fuses in

the under-hood fuse box by
looking through the top at the wire
inside. Removing these fuses
requires a Phillips-head screw-
driver.

FUSE PULLER

4. Check the smaller fuses in the

under-hood fuse box and all the
fuses in the interior fuse boxes by
pulling out each fuse with the fuse
puller provided in the under-hood

fuse box.

CONTINUED

Taking Care of the Unexpected

Main Menu

Table of Contents