Acura 2000 TL - Owner's Manual - Manual (Page 66)

Controls Near the Steering Wheel
Headlights
The rotating switch on the left lever
controls the lights. Turning this
switch to the "
" position turns
on the parking lights, taillights,
instrument panel lights, side-marker
lights, and rear license plate lights.
Turning the
switch to the" I "
position turns on the headlights.
If you leave the lights on with the
ignition switch in ACCESSORY (I)
or LOCK (0), you will hear a
reminder chime when you open the
driver's door.
To change between low beams and
high beams, pull the turn signal lever
until you hear a click, then let go.
The blue high beam indicator will
light (see page 56 ).
To flash the high beams, pull the
turn signal lever back lightly, then
release it. The high beams will come
on and go off.
The high beams will stay on for as
long as you hold the lever back, no
matter what position the headlight
switch is in.
Instruments and Controls
Main Menu Table of Contents