beautypg.com

Cooling system – Acura 2000 TL - Owner's Manual User Manual

Page 212

background image

Cooling System

1. Turn the ignition ON (II). Turn

the heater temperature control

dial to maximum heat (climate
control to 90°F/32°C). Turn off

the ignition. Open the hood. Make

sure the engine and radiator are
cool to the touch.

2. Remove the radiator cap.

DRAIN PLUG

DRAIN BOLT

3. Loosen the drain plug on the

bottom of the radiator. The
coolant will drain through the

splash guard. Loosen the drain

bolt at the rear of the engine

cylinder block.

RESERVE TANK CAP RESERVE TANK

HOLDER

4. Remove the reserve tank from its

holder by pulling it straight up.
Drain the coolant, then put the
tank back in its holder.

5. When the coolant stops draining,

tighten the drain plug at the
bottom of the radiator.

CONTINUED

Maintenance

Main Menu

Table of Contents