beautypg.com

Cooling system – Acura 2000 TL - Owner's Manual User Manual

Page 213

background image

Cooling System

6. Tighten the drain bolt at the rear

of the engine cylinder block
securely.

Tightening torque:

7 Ibf-ft(10N-m,1.0kgf-m)

7. Mix the recommended antifreeze

with an equal amount of purified

or distilled water in a clean
container. The cooling system
capacity is:

1.48 US gal (5.6 i, 1.23 Imp gal)

8. Pour coolant into the radiator up

to the base of the filler neck. Start
the engine and let it run for about

30 seconds. Then turn off the
engine. Pour coolant into the
radiator up to the base of the filler
neck.

9. Fill the reserve tank to the MAX

mark. Install the reserve tank cap.

10.Install the radiator cap, and

tighten it to the first stop.

Maintenance

Main Menu

Table of Contents