Indicator lights – Acura 2002 RL - Owner's Manual User Manual
Page 57
The engine can be severely damaged
if this light flashes or stays on when
the engine is running. For complete
information, see page
.
If this light comes on when the
engine is running, the battery is not
being charged. For complete
information, see page
.
This light has two functions:
If you do not fasten your seat belt,
the beeper will stop after a few
seconds but the light stays on until
you do. Both the light and the beeper
stay off if you fasten your seat belt
before turning on the ignition.
This indicator lights when you turn
the ignition switch ON (II). It is a
reminder to you and your passengers
to protect yourselves by fastening
the seat belts. A beeper also sounds
if you have not fastened your seat
belt.
The instrument panel has many
indicators to give you important
information about your car.
This indicator comes on when you
turn the ignition switch ON (II). It
is a reminder to check the parking
brake. Driving with the parking
brake not fully released can
damage the brakes and tires.
If the indicator remains lit after
you have fully released the
parking brake while the engine is
running, or if it comes on while
driving, it can indicate a problem
in the brake system. For complete
information, see page
.
1.
2.
Indicator Lights
Instruments and Controls
Low Oil Pressure
Indicator
Charging System
Indicator
Parking Brake and Brake System
Indicator
Seat Belt Reminder Light
54
U.S.
Canada
01/09/28 19:33:49 31SZ3660_057
Main Menu
Table of Contents