Acura 2002 RL - Owner's Manual - Manual (Page 148)

Make sure the tape opening on the
cassette is facing to the right, then
insert the cassette most of the way
into the slot. The system will pull it
in the rest of the way, and begin to
play.
The ignition switch must be in
ACCESSORY (I) or ON (II).
The tape direction indicator will light
to show you which side of the
cassette is playing. The
indicates
the side you inserted facing upward
is now playing. If you want to play
the other side, press the PROG/
PLAY button.
When the system reaches the end of
the tape, it will automatically reverse
direction and play the other side. If
you want to remove the cassette
from the drive, press the EJECT
button.
With a cassette playing, you can use
the FF, REW, TMS, or REPEAT
function to find a desired program.
If you turn the system off while a
tape is playing, either with the PWR/
VOL knob or by turning off the
ignition, the cassette will remain in
the drive. When you turn the system
back on, the tape will begin playing
where it left off.
To switch to the radio or CD
changer while listening to a tape,
press the AM/FM or CD/TAPE but-
ton. To change back to the cassette
player, press the CD/TAPE button.
Fast Forward and
Rewind move the tape rapidly. To
rewind the tape, push the REW
button. The indicator in this button
will light. To fast forward the tape,
push the FF button. The indicator in
this button will light. Press the
PROG/PLAY button to take the
system out of rewind or fast forward.
When the system reaches the end of
the tape, it reverses direction and
begins to play if in fast forward, or it
begins to play if in rewind.
Dolby B noise reduction turns on
when you insert a cassette. The
indicator in the
button will light.
If the tape was not recorded with
Dolby B noise reduction, turn it off
by pressing the
button.
CONTINUED
Operating the Cassette Player Tape Search Functions
FF/REW
Audio System
Comf ort and Convenience Features 145
01/09/28 19:48:22 31SZ3660_148
Main Menu Table of Contents