Onstar system – Acura 2002 RL - Owner's Manual User Manual
Page 174
Continue this until you have given
OnStar the complete telephone
number. Then say ‘‘Dial.’’
If the system has difficulty
understanding a voice command, it
can respond with:
‘‘Pardon’’
The system could not
match your voice command to one it
knows. Repeat the command
distinctly.
‘‘Slower please’’
The system
missed the command because it was
not yet ready for it, or there was too
much background noise. Repeat the
command after a short pause.
With
voice feedback off, the system will
respond with a tone rather than
‘‘Ready,’’ or repeating each number
you say. Other responses will still be
by voice. To turn voice feedback on
or off:
Press the DOT button.
OnStar will respond with ‘‘Dialing’’
and then repeat the complete
telephone number. It will then
place the telephone call.
When you have finished your
conversation, press the DOT
button again to hang up.
If you make a mistake speaking a
digit of the phone number, or the
system responds with the wrong
digit, say ‘‘Clear.’’ This will cause the
system to erase the last digit.
If you need to cancel the phone call
attempt before entering the
complete phone number, say ‘‘Cancel.’’
The system will cancel the operation
and return to Ready.
OnStar will respond with ‘‘Ready.’’
Say ‘‘Voice Feedback.’’
OnStar will respond with ‘‘Voice
feedback On/Off.’’
When someone places a telephone
call to you, the audio system will
mute and you will hear the ring.
Press the DOT button to answer the
call. When you have completed the
call, press the DOT button again to
hang up.
The OnStar system can store up to
twenty 32-digit telephone numbers in
its memory. When you store these
numbers in its memory, you give
each one a nametag. When you want
to place a telephone call, you can
recall the number by giving the
system the nametag.
CONTINUED
Comf ort and Convenience Features
OnStar System
Voice Feedback On/Of f
Incoming Telephone Calls
Using Nametags
171
01/09/28 19:52:59 31SZ3660_174
Main Menu
Table of Contents