Brake system indicator – Acura 2002 RL - Owner's Manual User Manual
Page 302
If you must drive the car a short
distance in this condition, drive
slowly and cautiously.
If it comes on at any other time, it
indicates a problem with the car’s
brake system. In most cases, the
problem is a low fluid level in the
brake fluid reservoir. Press lightly on
the brake pedal to see if it feels
normal. If it does, check the brake
fluid level the next time you stop at a
service station (see page
). If the
fluid level is low, take the car to your
dealer and have the brake system
inspected for leaks or worn brake
pads.
Slow down by shifting to a lower
gear, and pull to the side of the road
when it is safe. Because of the
longer distance needed to stop, it is
hazardous to drive the car. You
should have it towed, and repaired as
soon as possible. (See
on page
.)
However, if the brake pedal does not
feel normal, you should take
immediate action. Because of the
brake system’s dual-circuit design, a
problem in one part of the system
will still give you braking at two
wheels. You will feel the brake pedal
go down much farther before the car
begins to slow down, and you will
have to press harder on the pedal.
The distance needed to stop will be
much longer.
If the ABS indicator and the VSA
system indicator come on with this
indicator, have the car inspected by
your dealer immediately.
The Brake System Indicator
normally comes on when you turn
the ignition switch ON (II). It is a
reminder to check the parking brake.
It comes on and stays lit if you do not
fully release the parking brake.
Brake System Indicator
Taking Care of the Unexpected
Emergency
Towing
299
B
B
R
R
A
A
K
K
E
E
S
S
Y
Y
S
S
T
T
E
E
M
M
I
I
N
N
D
D
I
I
C
C
A
A
T
T
O
O
R
R
U
U
.
.
S
S
.
.
i
i
n
n
d
d
i
i
c
c
a
a
t
t
o
o
r
r
s
s
h
h
o
o
w
w
n
n
01/09/28 20:14:02 31SZ3660_302
Main Menu
Table of Contents