Instrument panel indicators – Acura 2005 RL - Owner's Manual User Manual
Page 66
If this happens, pull to the side of the
road when it is safe, check which tire
has lost the pressure on the multi-
information display, and determine
the cause. If it is because of a flat tire,
replace the flat tire with the compact
spare (see page
), and have the
flat tire repaired as soon as possible.
If two or more tires are underinflated,
call a professional towing service.
For more information, see page
.
Pull to the side of the road when it is
safe, shift to Park, and let the engine
idle until the indicator goes out.
This indicator normally comes on for
a few seconds when you turn the
ignition switch to ON (II).
If it comes on while driving, it
indicates that one or more of your
vehicle’s tires are extremely low on
pressure.
This indicator normally comes on for
a few seconds when you turn the
ignition switch to ON (II). If this
indicator comes on at any other time,
there is a problem in the SH-AWD
system. You will also see a ‘‘CHECK
SH-AWD SYSTEM’’ message on the
multi-information display (see page
). Take your vehicle to a dealer to
have it checked. For more
information, see page
.
You will also see a ‘‘CHECK TIRE
PRESSURE’’ message on the multi-
information display (see page
).
If it comes on while driving, it
indicates the differential
temperature is too high.
You will also see a ‘‘SH-AWD DIFF
TEMP. HIGH’’ message on the
multi-information display (see page
).
If the indicator blinks while driving,
pull to the side of the road when it is
safe, shift to Park, and let the engine
idle until the indicator goes out.
SH-AWD Indicator
Low Tire Pressure
Indicator
Instrument Panel Indicators
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
65
Continuing to drive with the SH-AWD
indicator blinking may cause serious
damage to the system.
Main Menu
Main Menu
Table of Contents