beautypg.com

Lights – Acura 2007 RDX - Owner's Manual User Manual

Page 366

background image

Remove the two bolt covers on the
rear pillar by prying on the bottom
edge with a flat-tip screwdriver.
Remove the bolts with a Phillips-
head screwdriver, and remove the
light assembly from the rear pillar.

Determine which of the three
bulbs is burned out: brake/
taillight, turn signal or rear side
marker.

Remove the socket by turning it
one-quarter turn counterclockwise.

Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.

Turn on the lights to make sure
the new bulb is working.

Put the socket back into the light
assembly, and turn it clockwise to
lock it in place.

Install the rear light assembly in
the rear pillar. Tighten the two
bolts. Snap the bolt covers into
position.

Open the tailgate.

2.

4.

5.

6.

7.

8.

3.

1.

Lights

Replacing Rear Bulbs
(in Rear Pillar)

362

COVERS

BOLTS

BULB

SOCKET

Main Menu

Table of Contents