Acura 2007 RDX - Owner's Manual - Manual (Page 337)

To change the information display
from the engine oil life display to the
odometer or the trip meter, press
and release the Select/Reset knob.
Immediately have the service
performed, and make sure to reset
the display as described on the
following.
All maintenance items displayed in
the information display are in code.
For an explanation of these
maintenance codes, see page
.
Your dealer will reset the display
after completing the required
maintenance service. You will see
‘‘OIL LIFE 100%’’ on the information
display the next time you turn the
ignition switch to the ON (II)
position.
If maintenance service is done by
someone other than your dealer,
reset the maintenance minder as
follows:
Press the Select/Reset knob
repeatedly until the engine oil life
is displayed.
Turn the ignition switch to the ON
(II) position.
When the engine oil life is 0 percent
or negative mileage, the
maintenance minder indicator
(
) remains on even if you
change the information display.
1.
2. 343
Maintenance Main Items and Sub
Items Resetting the Engine Oil Lif e
Display
Maintenance Minder
Ma
int
e
na
nce
333
MAINTENANCE MAIN ITEM
MAINTENANCE SUB ITEM(S)
Main Menu Table of Contents