Acura 2007 RDX - Owner's Manual - Manual (Page 209)

To activate AUTO SELECT, press
the AUDIO button to view the audio
control display. Push the interface
selector down to scroll down the
display, turn the dial to A. SEL, then
press ENTER on the interface
selector. You will see ‘‘AUTO SEL’’
flashing in the audio control display,
and ‘‘A. SEL’’ on the upper display.
Then, the system goes into scan
mode for several seconds.
If you are
traveling far from home and can no
longer receive your preset stations,
you can use the auto select feature to
find stations in the local area.
If you do not like the stations auto
select has stored, you can store
other frequencies on the preset
buttons (icons) as previously
described.
To turn off auto select, press
ENTER on the interface selector
(press the A.SEL button) again. This
restores the presets you originally
set.
For information on AM/FM radio
frequencies and reception, see page
.
For information, see page .
You will see ‘‘0’’ displayed if auto
select cannot find a strong station for
every preset button.
Press the A.SEL button. You will see
AUTO SEL on the screen, and the
system goes into scan mode for
several seconds. The system stores
the frequencies of six AM and
twelve FM stations in the preset
buttons.
227
231
On Canadian models
Audio System
AUTO SELECT
Radio Frequencies and Reception
Adjusting the Sound
Fe
a
tu
re
s
205
AUTO SEL INDICATOR
A.SEL ICON
Main Menu Table of Contents