beautypg.com

Installing a child seat, 2008 tl – Acura 2008 TL - Owner's Manual User Manual

Page 46

background image

Your vehicle is equipped with
LATCH (lower anchors and tethers
for children) at the outer rear seats.

To install a LATCH-compatible child
seat:

Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker’s instructions.

Some LATCH-compatible seats
have a rigid-type connector as
shown above.

Make sure there are no objects
near the anchors that could
prevent a secure connection
between the child seat and the
anchors.

Move the seat belt buckle or
tongue away from the lower
anchors.

The lower anchors are located
between the seat-back and seat
bottom, and are to be used only with
a child seat designed for use with
LATCH.

The location of each lower anchor is
indicated by a small button above the
anchor point.

1.

2.

3.

CONTINUED

Installing a Child Seat with
LATCH

Installing a Child Seat

Dr
iv

er
and

P

asseng

er
Saf

e

ty

43

MARKS

Ripid type

LOWER ANCHORS

2008 TL

Table Of Contents

Main Menu