Acura 2008 TL - Owner's Manual - Manual (Page 156)

Dolby noise reduction turns on
when you insert a tape. The
indicator will come on in the
display. If the tape was not recorded
in Dolby, turn it off by pressing the
(preset 4) button. Dolby
remains off until you press the
button again.
To remove the tape, press the eject
button. If you want to turn the player
off, press the power/volume knob or
turn off the ignition. The tape will
remain in the drive. When you turn
the system back on, the tape will
begin playing where it left off. To rewind the tape,
push the (preset 1) button. You
will see REW in the display. To fast
forward the tape, push the
(preset 3) button. You will see
FF displayed. Press the , ,
or PLAY/PROG button to take the
system out of rewind or fast forward.
Press the SEEK button
to find the beginning of the current
song or passage. Press the SEEK
button to find the beginning of the
next song or passage. When the
system reaches the beginning of a
song or passage, it begins to play it.
Press the RPT button
to continuously play a song or
passage. You will see RPT displayed.
The track will repeat until you press
the RPT button again.
To switch to the AM/FM radio, XM
Radio, or disc changer while a tape is
playing, press the AM/FM button,
XM button, or DISC/TAPE button.
To change back to the tape player,
press the DISC/TAPE button. Dolby noise reduction is manufactured under
license from Dolby Laboratories Licensing
Corporation. ‘‘DOLBY’’ and the double-D symbol
are trademarks of Dolby Laboratories
Licensing Corporation.
CONTINUED
To Stop Playing a Tape Tape Search Functions
FF/REW
SKIP
REPEAT
Audio System (Models without Navigation System)
Fe
a
tu
re
s
153
2008 TL
Table Of Contents Main Menu