beautypg.com

Seat heaters, 2008 tl – Acura 2008 TL - Owner's Manual User Manual

Page 114

background image

Follow these precautions whenever
you use the seat heaters:

Use the HI setting only to heat the
seats quickly, because it draws
large amounts of current from the
battery.

If the engine is left idling for an
extended period, do not use the
seat heaters even on the LO
setting. It can weaken the battery,
causing hard starting.

Both front seats are equipped with
seat heaters. Because of the sensors
for the side airbag cutoff system,
there is no heater in the passenger’s
seat-back. The ignition switch must
be in the ON (II) position to use the
heaters.

Push the right side of the switch, HI,
to rapidly heat up the seat. After the
seat reaches a comfortable
temperature, select LO by pushing
the left side of the switch. This will
keep the seat warm.

In the LO setting, the heater runs
continuously. It does not cycle with
temperature changes.

In the HI setting, the heater turns off
when the seat gets warm, and turns
back on after the seat’s temperature
drops.

Seat Heaters

Inst

ru

m

e

nt
s

a

nd

Cont

ro

ls

111

SEAT HEATER SWITCHES

2008 TL

Table Of Contents

Main Menu