Acura 2009 TL - Owner's Manual - Manual (Page 71)

This indicator has three functions:
It comes on as a reminder that you
have turned off the vehicle
stability assist (VSA) system.
It flashes when VSA is active (see
page
).
It comes on along with the VSA
system indicator if there is a
problem with the VSA or Hill Start
Assist (on SH-AWD models only)
system. You will also see a
‘‘CHECK VSA SYSTEM’’ message
on the multi-information display.
Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. ON Mode
is the equivalent of ON (II), and
START Mode is the equivalent
of START (III). For more
information, see pages
and
.
If it comes on and stays on at any
other time, or it does not come on
when you turn the ignition switch to
the ON (II) position, there is a
problem with the VSA or Hill Start
Assist (on SH-AWD models only)
system. You will also see a ‘‘CHECK
VSA SYSTEM’’ message on the
multi-information display. Take your
vehicle to a dealer to have it checked.
Without VSA, your vehicle still has
normal driving ability, but will not
have VSA traction and stability
enhancement. For more information,
see page
.
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. It may also come on briefly
when the ignition switch is turned to
the START (III) position.
1.
2.
3.
523
523 :
178
180
Vehicle Stability Assist
(VSA) System Indicator VSA Activation Indicator
Instrument Panel Indicators
68
2009 TL
Table Of Contents Main Menu