Acura 2009 TL - Owner's Manual - Manual (Page 161)

To lower either rear outer head
restraint for better visibility, press
the tilt button on the side of the head
restraint. It folds down backward. To
raise the rear outer head restraint,
pull up it on the rear by hand. Make
sure the head restraint locks in
position when you lower or raise it.
When reinstalling a head restraint,
put the legs back in place. Then
adjust it to the appropriate height
while pressing the release button.
To remove a front or rear center
head restraint for cleaning or repair,
pull it up as far as it will go. Push the
release button, then pull the restraint
out of the seat-back.
Make sure the head restraint locks
in position when you reinstall it.
To remove either rear outer head
restraint, push the tilt button, then
fold the head restraint backward.
Push the release button, then pull
the restraint out of the seat-back.
Seats
Removing the Head Restraint
158
Rear Outer
TILT BUTTON
Rear Outer TILT BUTTON
RELEASE BUTTON
Failure to reinstall the head
restraints can result in severe
injury during a crash.
Always replace the head
restraints before driving.
2009 TL
Table Of Contents Main Menu