Acura 2009 TL - Owner's Manual - Manual (Page 284)

You will see SCAN on the screen.
The system will scan for a station
with a strong signal. When it finds
one, it will stop and play that station
for about 10 seconds. If you do
nothing, the system will then scan
for the next strong station and play it
for 10 seconds. When it plays a
station that you want to listen to,
press the SCAN side of the bar again.
Each preset button or
preset icon can store one frequency
on AM and two frequencies on FM.
Select the desired band, AM or
FM. FM1 and FM2 let you store
six stations each.
Use the tune, skip (seek), scan, or
RDS function to tune the radio to a
desired station.
Press the preset button, and hold
it until you hear a beep. You can
also store frequencies with the
interface dial. Select the preset
icon you want to store the
frequency on, then press ENTER
on the interface selector, and hold
it until you hear a beep.
Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
If you are
traveling far from home and can no
longer receive your preset stations,
you can use the auto select feature to
find strong signal stations in the local
area.
1.
2.
3.
4.
To store a preset memory location:
CONTINUED
Preset
AUTO SELECT
Playing the AM/FM Radio (Models with navigation system)
Fe
a
tu
re
s
281
A.SEL INDICATOR
A.SEL
2009 TL
Table Of Contents Main Menu