beautypg.com

Tire repair kit, Changing a flat tire – Acura 2015 TLX - Owner's Guide (Without Software Update) Ver. ST02 User Manual

Page 56

background image

104 |

| 105

HANDLING THE UNEXPECTED

HANDLING THE UNEXPECTED

TABLE OF CONTENTS

INDEX

VISUAL INDEX

V

OICE COMMAND

INDEX

SAFETY

INFORMA

TION

CLIENT

INFORMA

TION

INSTRUMENT

PANEL

SPECIFICA

TIONS

VEHICLE

CONTR

OLS

MAINTENANCE

AUDIO AND

CONNECTIVITY

HANDLING THE

UNEXPECTED

BL

UET

OO

TH

®

HANDSFREELINK

®

DRIVING

A

CURALINK

®

NA
VIGA

TION

Tire Repair Kit*

If a tire has a small puncture, you can use the tire repair kit to temporarily repair it.
The puncture must be smaller than 3/16-inch (4 mm) and not in the tire sidewall.
Go to a dealer to have the full-size tire permanently repaired or replaced.

Before Repairing the Tire

1. Park the vehicle on firm, level, non-slippery surface.
2. Make sure the vehicle is in Park (P), and apply the electric parking brake.
3. Turn on the hazard warning lights, and turn the vehicle off.

Getting Ready to Repair the Tire

1. Open the trunk. Pull up the strap on the trunk

floor lid, and open the lid.

If equipped, turn the knob on the tool case lid
counterclockwise, and remove the cover.

2. Remove the kit.

3. Place the kit face up on flat ground near the

punctured tire and away from traffic. Do not
place the kit on its side.

4. Follow the instructions in the kit to repair the

tire.

Trunk floor

lid strap

Cover

Knob

Do not use a puncture-repairing agent other than the one provided in the kit that
came with your vehicle. If a different agent is used, you may permanently damage
the tire pressure sensor.

NOTICE

*if equipped

Changing a Flat Tire

If a tire goes flat while driving, grasp the steering wheel firmly, and brake gradually
to reduce speed. Stop in a safe place. Replace the flat tire with the compact
spare tire*. Go to a dealer as soon as possible to have the full-size tire repaired or
replaced.

Before Changing the Tire

1. Park the vehicle on a firm, level, non-slippery surface.
2. Put the vehicle in Park (P), and apply the parking brake.
3. Turn on the hazard warning lights and turn the vehicle off.

Getting Ready to Change the Tire

1. Open the trunk. Open the trunk floor lid.

2. Take the tool case out of the trunk. Take the

jack and wheel nut wrench out of the tool
case.

3. Unscrew the wing bolt, and remove the spacer

cone. Then, remove the spare tire.

4. Place the compact spare tire wheel side up

under the vehicle body, near the tire that
needs to be replaced.

5. Loosen each wheel nut about one turn using

the wheel nut wrench.

Tool case

Spare tire

*if equipped