Set your preferred interior temperature by selecting the proper mix of heated
or cooled air and fan speed. Use the On-Demand Multi-Use Display (ODMD) or
buttons to operate the system.

Climate control operation is affected during auto idle stop operation* (see page 83).

Recirculation/

fresh air mode

Driver’s side

temperature

On-Demand Multi-Use Display (ODMD)
When you select a climate control icon, a new screen appears where you can

make adjustments or change settings.

Airflow

control mode

AC: Turn the air conditioning on or off.
SYNC: Set the passenger’s side temperature

to the same as the driver’s side.

Fan

speed

Passenger’s side

temperature

Shortcuts

(Climate tab):

Store or select

two climate

control settings.

Windshield

defroster

button

Driver’s side

temperature

switch

Climate control buttons

ON/OFF

button

AUTO button: Press, then

adjust the temperature to

your preferred setting.

Rear window

defogger/heated

mirror button

Passenger’s side

temperature

switch

*if equipped

Seat Heaters and Ventilation*

Quickly warm or cool the seats when the vehicle is on.

Front Seat Heaters or Ventilation*

Use the On-Demand Multi-Use Display (ODMD) to operate the front seat
heaters or ventilation.

When the vehicle is turned off, the heating or cooling setting returns to off at the
next vehicle start. If AUTO is selected, the setting remains in AUTO.

Rear Seat Heaters*

Canadian models

Use the buttons on the rear of the center
console to operate the rear outer seat heaters.
Press either seat heater button to toggle
through the HI, MID, LO, or OFF settings. The
appropriate indicator appears for each setting.

Heat-induced burns are possible when using seat heaters.
Persons with a diminished ability to sense temperature (e.g., persons with
diabetes, lower-limb nerve damage, or paralysis) or with sensitive skin should
not use the seat heaters.

WARNING

*if equipped

ODMD screen

Select to enter the seat

heating screen.

Select LO, MID,

or HI level.
+: Increase

heating or

cooling levels.
AUTO*: The

system selects

the best

setting based

on ambient

temperature.

OFF: Turn the

seat heaters off.

-: Decrease

heating or

cooling levels.

Close the

menu.