Acura 2015 MDX - Owner's Manual (Revised 12/12/2014) User Manual
Page 456
Continued
455
uu
If a Tire Goes Flat
u
Temporarily Repairing a Flat Tire
*
Han
d
lin
g the U
n
expected
7. Press the inflator switch to turn on the
compressor.
u
The compressor starts injecting sealant
and air into the tire.
8. When the sealant injection is complete,
continue to add air.
9. After the air pressure reaches 35 psi (240
kPa), turn off the kit.
u
To check the pressure, occasionally turn
off the compressor and read the gauge.
10. Unplug the power plug from the accessory
power socket.
11. Unscrew the sealant/air hose from the tire
valve stem. Reinstall the valve cap.
12. Press the pressure relief button until the
gauge returns to 0 psi (0 kPa).
Pressure Gauge
ON
OFF
1
If the required air pressure is not reached within 15
minutes, the tire may be too severely damaged for
the kit to provide the necessary seal and your vehicle
will need to be towed.
See an Acura dealer for a replacement sealant bottle
and proper disposal of an empty bottle.
Sealant/Air Hose
Valve Stem
Pressure Relief Button
15 ACURA MDX-31TZ56100.book 455 ページ ２０１４年１１月２８日 金曜日 午後５時１７分