Acura 2015 MDX - Owner's Manual (Revised 12/12/2014) - Manual (Page 166)

Continued 165
uu Adjusting the Seats u Adjusting the Seat Positions
Co
ntrols
A passenger sitting in the second row center
seating position should adjust the height of
their head restraint to an appropriate position
before the vehicle begins moving.
To raise the head restraint:
Pull it upward.
To lower the head restraint:
Push it down while pressing the release
button.
Head restraints can be removed for cleaning or repair.
To remove a head restraint:
Pull the restraint up as far as it will go. Then push the release button, and pull the
restraint up and out.
To reinstall a head restraint:
Insert the legs back in place, then adjust the head restraint to an appropriate height
while pressing the release button. Pull up on the restraint to make sure it is locked
in position.
■ Changing the Second Row Center Seat Head Restraint
Position
■
Removing and Reinstalling the Head Restraints 1 Removing and Reinstalling the Head Restraints
3 WARNING
Failure to reinstall, or correctly reinstall, the
head restraints can result in severe injury
during a crash.
Always replace the head restraints before
driving.
Front and second row head restraints
15 ACURA MDX-31TZ56100.book 165 ページ ２０１４年１１月２８日 金曜日 午後５時１７分