Acura 2015 MDX - Owner's Manual (Revised 12/12/2014) - Manual (Page 154)

153
uu Operating the Switches Around the Steering Wheel u Brightness Control
Co
ntrols
Brightness Control
When the power mode is in ON, you can use
the
( + or ( - button to adjust instrument
panel brightness.
To brighten: Press the
( + button.
To dim: Press the ( - button.
You will hear a beep when the brightness
reaches minimum or maximum. The MID will
return to its original state several seconds after
you adjust the brightness.
■ Brightness level indicator
The brightness level is shown on the MID
while you are adjusting it.
1 Brightness Control
Instrument panel brightness varies, depending on
whether the exterior lights are on or off. The
instrument panel dims to reduce glare when they are
on.
When it is bright outside and the headlight
integration with the wiper is activated, the
instrument panel brightness does not change.
Rolling the multi-function steering-wheel changes to
a different display.
If you press the ( + button until the brightness display
is up to max, the beeper sounds. This cancels the
reduced instrument panel brightness when the
parking lights are on.
The brightness can be set differently for when the
exterior lights are on, and when they are off.
( + Button
( - Button
15 ACURA MDX-31TZ56100.book 153 ページ ２０１４年１１月２８日 金曜日 午後５時１７分