Kofax Transformation Modules 3.5 - Manual (Page 11)

Kofax Transformation Modules Installation Guide 3
System Requirements
Minimum Hardware Requirements
This section lists the hardware requirements for installing and using Kofax Trans-
formation Modules, the certified operating systems, the certified versions of Kofax
Capture and the required Direct X version.
Processor: Pentium class 1.5 GHz processor
System memory: 512 MB
Disk space: 1 GB for the installation and enough space (approximately
1 GB) for the image files used for classification (for client/
server installations, on the corresponding drive of the serv-
er; for standalone installations, on the drive where Kofax
Capture is installed).
Display: 1024 x 768 with 16-bit color, small fonts; 24-bit color is
recommended for the best viewing.
Recommended Hardware Requirements for Project Builder
and Validation
This section lists the recommended hardware requirements for installing and using
Project Builder and Validation.
Processor: Pentium class 2.0 GHz processor (dual core)
System memory: 2 GB
Disk space: 1 GB for the installation and enough space (approximate-
ly 10 GB or more) for the image files used for classifica-
tion (for client/server installations, on the corresponding
drive of the server; for standalone installations, on the drive
where Kofax Capture is installed).
Display: 1600 x1200 with 24-bit color, small fonts; 24-bit color is
recommended for the best viewing.