Casio SF-4985ER - Manual (Page 101)

99
To set up the SF Unit to receive data
1. While an initial screen is displayed, press FUNC twice to display the second
function menu.
•
You can perform the above operation while the initial screen of the Telephone
Directory, Memo Mode, Schedule Keeper, To Do Mode, Calendar or Re-
minder is displayed.
•
In the Expense Mode, you should press FUNC three times.
•
If you want the received data to be stored in the secret memory area, you
should also enter the secret memory area at this point. If you are in the open
memory area on the receiving unit, received data is stored into the open
memory area.
2. Press 4 to select DATA COMM.
3. Press 2 to select RECEIVE.
•
This message indicates that the receive unit is standing by for data. Perform
the required procedures to start sending data from another SF Unit, a CSF
Unit, an NX Unit (see manual for details) or a personal computer (see the
Interface Unit manual for details).
•
To abort the receive operation at any time, press ESC .
•
This procedure is the same regardless of whether the data is received from
another SF Unit, a CSF Unit, an NX Unit or from a personal computer.
4. The display changes to the following once the SF Unit starts receiving data.
•
The number of data items received is counted on the display.
•
If an error occurs during the receive operation, the message “TRANSMIT
ERROR!
” appears on the display. Press ESC to clear the error message.
•
Received data is added to the data already stored in memory. If the memory
becomes full during the receive operation, the message “MEMORY FULL!”
appears and data transfer stops. Press
ESC to clear the error message.
Receive data
item count
Setting Up for Data Communications