Kimber Solo - Manual (Page 24)

24
NOTE: Fully seat the top round as shown above
in Figure 6.
3. Place the magazine in the magazine well in the
frame, with rounds facing forward and push
up until magazine is fully seated. A click should
be heard as the magazine catch engages
when this is done properly.
4. To chamber a round, hold the firearm in the
shooting hand without touching the trigger.
Make sure the muzzle is pointed in a safe
direction.
2. To load the magazine,
place a round at the top
(open end), then push
down and back making
sure that the back of the
cartridge is facing the
rear of the magazine.
Repeat this procedure
until magazine is fully
loaded.(Figure 5)
5
6