Kimber Solo - Manual (Page 23)

23
LOADING
Keep muzzle pointed in safe direction and follow
all safety procedures at all times. Practice these
steps with an unloaded firearm or dummy ammo
until you are completely familiar and comfortable
with the procedures. Use live ammo only when
preparing to shoot. Only use clean, dry,
high-quality, factory-fresh premium personal
defense ammunition in SOLO (of the proper
caliber) that meets industry performance
standards. NEVER TOUCH THE TRIGGER
WHEN LOADING OR UNLOADING THE
FIREARM.
1. To release the empty magazine from the frame,
hold hand under magazine and push the magazine
catch (Figure 4/1a) which is located on either
the left or right side of the frame behind the
trigger. This will cause the magazine to fall
free of the magazine well (Figure 4/2a).
4
1a
2a