Inovonics FA416 - Manual (Page 2)

© 1997 Inovonics Wireless Corporation LIT-FA416-INSTALL 2 02304e 23-Oct-02
Overview:
• The FA416 receiver is a high performance wireless receiver with 4 configurable alarm outputs and 1 global
fault output.
• The FA416 has default settings which permit 4 transmitters to be programmed to it. Two of these transmitters
may be normally open devices; two may be normally closed devices or have normally closed contacts.
• The FA416R and FA416DR have 5 onboard Form C relays. In all other respects they are identical to the
FA416 and FA416D.
• When the FA516 display module is added to the FA416 or FA416R, the assembly is designated the FA416D
and the FA464DR, respectively. The FA416D(R) can program and supervise 16 transmitters, with assorted
default assignments of external contact types and outputs. The display module indicates point numbers and
status of transmitter alarm and faults.
• The FA116 programmer can be used with either the FA416, FA416D, FA416R or FA416DR. The programmer
lets the user change all default settings for transmitters and outputs. With the FA116, users can program 16
points into the FA416 without the FA516 display module. The FA116 also has a signal level and signal margin
monitoring function, making it very useful for site surveys and troubleshooting.
Tamper Terminal
block
Tamper switch
Decode LED
Valid decode LED
DECODE
VALID
DECODE
RESET
13.6V
GND
1
2
3
4
FAULT
GND
TMPR
ADV DEL
NO
NC
RE
S
E
T
Transmitter
Programming Port
Reset
Button
FA104 Programmer Port
Advance
Button
Delete
Button
Output Select Jumper
Output 1 LED
Output 2 LED
Output 3 LED
Output 4 LED
Global Fault
LED
FA516 Display
Module connector
Transmitter # Display
Activated LED
Tamper LED
Low battery LED
Inactive LED
Programmed LED
Review Status
Button
FA116
Programmer
Port
FA516
Display Module
(Optional)
Figure 1: FA416 / FA416D receiver
Note: References in this manual to features shown In Figure 1 will be printed in italics.
FA416
16-Channel Receiver