Doepfer MKE Universal Midi Keyboard Electronics Kit - Manual (Page 5)

User's guide V2 page 5 MKE
If you order MKE in combination with one of the keyboards we have available (Fatar
TP7/2 octaves or TP/9 with 3, 4 or 5 octaves or organ keyboard TP/8O with 5
octaves) please do not forget to order the cable sets that are required to connect
MKE to the keyboard.
If MKE is ordered without keyboard please specify the length of the keyboard as
the connectors are different for 2, 3, 4 and 5 octaves.
We have suitable keyboards (2, 3, 4 or 5 octaves), keyboard connection cable sets,
pitch bend or modulation wheel kits, cable sets for ST3...6, sustain pedals and so on
available. Please look at our web price list (section spare parts resp. accessories) for
details and prices. These parts are not included with the MKE and have to be ordered
separately.
We do not offer a suitable housing as the MKE can be combined with different types
of keyboards and other OEM products (e.g. Pocket Electronics, Dial Electronics,
CTM64, MTC64) to obtain a user-specific Midi controller.
An external power supply (7-12VDC@min. 250mA) is required. It is included with
the MKE only within Germany. In other countries the external power supply has to be
ordered additionally by the local dealer if necessary.
Installation of the MKE requires some electronical knowledge (especially if wheels,
potentiometers, the after touch sensor or a sustain foot switch have to be connected
to the MKE). Please leave the installation of MKE to an expert if you are not familiar
with electronics. We take back only MKE modules in the original state, i.e. without
solder residues, without scratches and so on.
Please pay attention to the following remarks and to the warranty notes on page 2.
Ignoring these notes causes warranty loss and the right to return the goods
.