Doepfer SK2000 Midi Masterkeyboard (device no longer available) - Manual (Page 14)

Page 14 SK2000 User's Guide
Effect/Value
This menu is used to select one of 11 reverb and 11 chorus effects. Different effect parameters (e.g.
feedback of both reverb and chorus, reverb time, chorus LFO frequency) can be adjusted in this menu too.
The settings in this menu are global, i.e. they are valid for all parts independent of which part button was
operated to enter the menu.
Param./Value
The MIDI XG standard uses a lot of additional parameters to adjust the sound called up with the program
change/sounds menu. SK2000 enables the control and storage in the preset of the following XG sound
parameters :
pan, modulation intensity, modulation frequency, filter cutoff frequency, filter resonance, velocity sensitivity,
reverb send volume, chorus send volume (MIDI channel and volume are adjusted in the CHN/VOLUME
menu).
Panic
Pressing one of these two keys calls up the panic menu. Whenever one of the 64 Value/Number keys is
operated in this conditon "All Notes Off" and "All Controllers Off" messages are sent on all 16 MIDI-channels.
If the device controlled by the SK2000 does not respond to the "All Notes Off" message it is also possible to
transmit all 128 single "Note Off" messages using the Preselect keys 1-16. The number of the Preselect key
determines the MIDI channel for the "Note Off" messages. To transmit 128 "Note Off" messages on all 16
MIDI channels all 16 Preselet keys have to be operated one after another.