Doepfer SK2000 Midi Masterkeyboard (device no longer available) - Manual (Page 10)

Page 10 SK2000 User's Guide
MENU KEYS
The first 8 keys of the keyboard (A-1 to E 0) are used as menu keys.
•
A menu is selected by pressing the corresponding menu key after one of the buttons part 1 or part 2
is pressed. In the menu mode the LED control turns off and it is not possible to play on the keyboard
(i.e. no MIDI note messages are generated) as the keys are used to adjust the parameters of the
SK2000.
•
Each menu is exited by pressing the same button part 1 or 2 a second time .
•
Some menus are exited by pressing one of the keys of the keyboards.
•
Whenever the LED lights up the play mode is active.
The 8 keyboard menu keys are assigned to the following menus:
A 1 A# 1 B 1 C 0 C#0 D 0 D# 0 E 0
PRESET Chn_Volume Prg_Chn Sounds Effects Sound_Par. Panic Panic
To adjust the parameters the remaining keys of the keyboard are used. The remaining keys are divided into
two main groups: preselect keys and value/number keys
PRESELECT KEYS