Vermont Casting VM508 - Manual (Page 12)

50004425
Hooking Up to the Propane (LP) Gas Supply
CONNECTING THE GRILL TO A PROPANE (LP) GAS CYLINDER
1. Always secure the propane tank in the tank locator hole in
the bottom pan of the cylinder-compartment.
2. Always confirm that all burner control knobs are in the
OFF position before activating the gas supply.
3. Always connect the gas supply regulator by
first inserting the nipple of the valve coupling
into the tank valve and then tightening the con-
nection collar by turning it clockwise with one
hand while holding the regulator with the other as
shown in Figure 4.
Always conduct the gas leak test described on Page 5 before
attempting to light this Grill, to prevent a possible fire or
explosion.
1. Never store or use gasoline or any other volatile substance in
the vicinity of this Grill.
2. Never store a spare propane cylinder in the vicinity of this Grill, or in the vicinity
of any other potential heat source.
Always consult your local gas supplier for professional assistance before attempting to
connect this Grill to a fixed pipe bulk Propane (LP) gas supply system.
Gas Hookup
Page 4
����
�������
����
Figure 4
B166
����
���������
����
Figure 5
B126
50/50 Solution of liquid
soap and water
WARNING
NOTICE