COP-USA WS08 - Manual (Page 68)

Network Video Server/IP Camera User Manual
68
Appendix III Default parameters
1. Network parameter
1) Network Video Server and IP Camera default parameters
Parameters Default
IP address 192.168.1.100
Subnet address 255.255.255.0
Gateway 192.168.1.1
Data port 8200
Web port 80
Mobile port 15961
UPNP Off
2. Username and password
Parameter Default
Username admin
Password admin
Appendix IIII Answer of common failures
Ask: how to connect quickly and preview images for newly bought machine?
Answer: please read <DVS/IP Camera Quick User Guide> before you use the device.
Ask: why the IP of device can’t be found when the search tool of DVS/IP Camera is opened?
Answer: reason 1: DVS/IP Camera is not switched on, or power adapter conforming to standard is
not available;
Solution: use standard power adaptor of DVS/IP Camera to supply power to device, examine
the power indicator (PWR) of device to see if it is lit, and examine the device running lamp (RUN)
to see if it is flashing normally.
Reason 2: network cable is damaged or too long;
Solution: fabricate network cable again, the length of single network cable should not exceed
80 meters, use super 5 category or 6 category shielded network cable with better quality as
possible; after network cable is connected, please examine the network connection indicator to see
if it is lit.
Reason 3: the firewall of computer has prevented the search tool;
Solution: before the search tool is opened, please firstly try to close the firewall of computer