Dvs/ip camera access, Dvs/ip camera login – COP-USA WS08 User Manual

Page 13

Network Video Server/IP Camera User Manual

Step I: Connect DVS/IP Camera to network by network cable

Step II: Plug the equipped power adaptor to DVS/IP Camera power socket, then connect with
external electricity

Step III:

Turn on the computer, connect to front-end DVS/IP Camera, and then conduct
software setting

Instructions: Also may connect the DVS/IP Camera with computer directly

3. DVS/IP Camera access

3.1. DVS/IP Camera login

3.1.1. Steps of login



Step 1:

add a IP address to computer so as to access DVS/IP Camera, for example:

192.168.1.99

, the detailed operation is as follow:

If you are using Windows 2000/XP operating system
3. After entering the operating system, click【Start】→【Setting】→【Control Panel】, open “Network