ChemoMetec NC-200 - Manual (Page 26)

4 Start-up
991-0203 Rev. 1.1 Sep. 2012 12
4.1.1 Starting up
The NucleoCounter NC-200 is connected to a PC by inserting the respective plugs of a USB
cable into the instrument and the PC.
Once the NucleoView NC-200 program is launched the stepping motor for the piston
actuator performs a homing procedure in order to assure correct positioning of the
actuator.
After this initialization, the status indicator on the front will turn green and the
NucleoCounter NC-200 is ready for operation.