ChemoMetec NC-200 - Manual (Page 17)

1 Inspection, Unpacking and Installation of Equipment
991-0203 Rev. 1.1 Sep. 2012 3
1 Inspection, Unpacking and Installation of
Equipment
Upon receiving the order from ChemoMetec A/S, the box or boxes should be carefully
inspected for any damage that may have occurred during shipping. Any damage must be
reported to the carrier and to ChemoMetec A/S immediately.
Unpack the order, saving the packing materials for possible later use.
Verify that the ChemoMetec packing list received refers to the correct and ordered
materials, and that nothing is missing.
If any part of the order was damaged during shipping , is missing, or fails to operate, please
contact ChemoMetec A/S.
The document supplied with the instrument
2
:

IQ - Installation Qualification of the NucleoCounter NC-200
This document describes in details how to inspect, unpack and install the NucleoCounter
NC-200 instrument and the NucleoView NC-200 software. This IQ will also ensure that the
instruments basic functions respond correctly.
1.1 Operation of the NucleoCounter NC-200.
Before starting to use the NucleoCounter NC-200, it is important to refer to the following
document:

OQ - Operation Qualification of the NucleoCounter NC-200
This document presents a procedure which, upon successful completion, will assure that
the advanced functions of the instrument are executed correctly.
Once the IQ and the OQ are finalized successfully, actual operation with the
NucleoCounter NC-200 can begin.
2
This document is present on the USB Flash drive supplied with the instrument