Checkline RH1 - Manual (Page 6)

 Electromatic Equipment Co., Inc.
-6-
5.1 Main menu
Edit Logs
Manual Logs
Auto Logs
Clear Logs
Print Logs
Last Logs
All Logs
Clear Logs
Send Logs
Manual Logs
Auto Logs
Clear Logs
Options
Date / Time
Log Time
Language
Unlock
°C / °F
Userlevel
BL On Time
Auto Off Time
Calibrate
Materialcalib.
Password
Reset
Status
 Electromatic Equipment Co., Inc.
-11-
8.0 TRANSFER SAVED DATA TO THE PC
To send your saved logs to the PC, connect the moisture
meter device to your PC using the USB cable that was
delivered with your device. Carefully loose the protection
cap on your moisture meter and plug in the USB mini B
connector. The bigger connector has to be connected to a
USB slot on your PC. Start the LogMemorizer software on
your PC and switch on your moisture meter.
The data transfer can be started on your moisture meter or
on the software.
Starting the data transfer on the moisture meter:
Press the key until you reach the menu (see image on
the right). Then choose „Send Logs“ and confirm by
pressing the
key. Now choose „Manual Logs“ and
confirm with again. All saved logs will be sent to your
PC.
Starting the data transfer on your PC:
Press the button „remote control“ in the LogMemorizer
software. A drop-down menu with several options opens
(see image below).
For transferring the data you can select „Import last
manual log“ (the last saved measuring series is
transferred) or „Import all manual logs“ (all saved logs are
transferred).
If you click on one of these menu items, the transfer starts
immediately.
For the basic adjustments of the softw are please look through the
instructions on the LogMemorizer CD.