Checkline RH1 - Manual (Page 2)

 Electromatic Equipment Co., Inc.
-2-
1.0
INTRODUCTION
To switch on the instrument, press the
key for 3 seconds. If a menu item is
shown, press the left key Exit or Rolling Menu until the measuring window
appears. The measurement value is now shown on the display.
2.0
CALIBRATION CURVES
Name of
calibration curve Meaning Unit Instrument
relHum Relative humidity of Air %RH RH1 / RH5
Dew Point Dew point °C or °F RH1 / RH5
absHum Absolute humidity of Air g/m³ RH1
EMC Wood Equilibrium moisture
content of wood
%EMC RH1
Explanation of calibration curves :
relHum: This shows the relative air humidity in %RH (relative humidity) and the
temperature in the selected unit (°C or °F).
absHum: This shows the absolute air humidity in g/m³ (grams of water per cubic
meter of air) and the temperature in the selected unit (°C or °F).
Dew Point: This shows the dew point and the temperature in the selected unit (°C
or °F).
EMC Wood: This shows the equilibrium moisture content of wood (for the timber
stored under these conditions) in % moisture cont. of wood and the temperature in
the selected unit (°C or °F).
 Electromatic Equipment Co., Inc.
-15-
14.0 TECHNICAL DATA
Measurement:
Meas. Range / Resolution / Accuracy
Relative humidity: 0 to 100%RH / 0.1% / ±1.5% (0 - 90% at 25°C)
Temperature Pt1000 DIN B °C:
-10 to +60°C / 0.1°C / ±0.4°C (at 25°C)
Temperature °F: 14 to 140°F / 0.3°F / ±0.7°F (at 77°F)
Dew Point °C: -55 to +60°C / 0.1°C
Dew Point °F: -67 to 140°F / 0.3°F
Absolute humidity: 0 to 130g/m³ / 0.1g/m³
Equilibrium moisture
content of wood:
2 to 30% / 0.1% / ±0.5% (at 25°C)
Operating temp. range -10°C to 60°C / 14 to 140°F
Storage temperature -20°C to 60°C / -4 to 140°F
Temperature compensation Automatic
Memory for meas. values approx 10.000 meas. values
Menu languages Deutsch, English, Français, Italiano
Power supply 4 x 1.5 Volt AA Alkaline Batteries (approx.
1800 measurements)
Switchoff time after approx. 4 minutes
Power consumption 55 mA (with display lighting)
Displa y 128 x 64 matrix display, with LED backlighting
Dimensions : Housing: Sensor: Weight (incl. batt.)
RH1 : 145 x 63 x 24mm 100mm x Ø 12mm approx. 210g
RH5 : 145 x 63 x 29mm 295mm x 20mm x 4mm approx. 285g
Protection class IP 40
Delivery includes Wooden case
4 x 1.5 Volt AA Alkaline Batteries
Short instruction manual