Returning for service, Calibration – Checkline AT-A User Manual

Page 11

Page 12

DeFelsko’s sole warranty, remedy, and liability are the express limited warranty,
remedy, and limited liability that are set forth on its website:

www.defelsko.com/terms

www.defelsko.com

This manual is copyrighted with all rights reserved and may not be reproduced or transmitted, in whole
or part, by any means, without written permission from DeFelsko Corporation.

DeFelsko, PosiTector, PosiTest and PosiSoft are trademarks of DeFelsko Corporation registered in the
U.S. and in other countries. Other brand or product names are trademarks or registered trademarks of
their respective holders.

Protection provided by the equipment may be impaired if the equipment is used in a manner not
specified by the manufacturer.

Every effort has been made to ensure that the information in this manual is accurate. DeFelsko is not
responsible for printing or clerical errors.

Returning for Service

There are no user serviceable components. Any service must be performed by
DeFelsko Corporation.

If you need to return the Instrument for service, describe the problem fully and
include reading results, if any. Be sure to include contact information including your
company name, company contact, telephone number and fax number or email
address.

www.defelsko.com/support

Calibration

The PosiTest is shipped with a Certificate of Calibration showing traceability to a
national standard. For organizations with re-certification requirements, the PosiTest
may be returned at regular intervals for calibration. DeFelsko recommends that our
customers establish the instrument calibration intervals based upon their own
experience and work environment. Based on our product knowledge, data and
customer feedback, a one year calibration interval from either the date of
calibration, date of purchase, or date of receipt is a typical starting point.

Limited Warranty, Sole Remedy and Limited Liability

This manual is related to the following products:

AT-M