Checkline DCF-900 User Manual
Page 4
3 .0 Equipm e nt
Supplie d
3.1 Standard Accessories
DCF-900 and DCN-900 gauges are supplied with the following
standard accessories:
a.
DCF: One (1) bare steel test plate for setting ZERO.
DCN: One (1) bare aluminum test plate for setting ZERO.
b.
Two (2) non-metallic, commercial-grade calibrating shims.
c.
One 9-Volt DC alkaline battery.
d. DCF-900
User’s
Guide.
e.
Carrying case.
3.2 Optional Calibration Standards
a.
Model TS-5CG Set of five (5) commercial-grade,
non-metallic, calibration shims (1, 2, 5, 10 & 20 mils /
25.4, 50.8, 127, 254, 508mm).
b.
NTS-4 NIST Traceable Plastic Shims
(1.00, 2.00, 4.00 mils / 25, 51, 102mm)
NTS-20 NIST Traceable Plastic Shims
(5.00, 10.00, 20.00 mils / 127, 254, 508mm)
c.
NIST Certified Standards
9 .0
M a int e na nc e , Spa re Pa rt s & Se rvic e
9.1 Maintenance
Except for keeping all parts clean and replacing worn-out
batteries, there are no special maintenance requirements.
DO NOT USE ANY LUBRICANTS, SOLVENTS OR
ABRASIVES.
A mild soap solution, used sparingly, can be used to clean the
housing and connecting cable. Do not use any water or solvent on
the probe body or tip. Keeping the probe tip clean is critical for
obtaining accurate, repeatable readings. Use a dry cloth to keep the
tip clean. It is recommended that the gauge be stored in its carrying
case when not in use.
9.2 Spare Parts & Service
A complete stock of replacement spare parts and a service facility
are maintained at ELECTROMATIC Equipment Co.,Inc.,
Cedarhurst, NY 11516-USA.
TEL. 800-645-4330 (USA only) or 516-295-4300.
FAX. 516-295-4399
If there are any questions regarding the operation of the DCF-900
or DCN-900 gauge, and before sending any unit back for repair, it
is strongly recommended that the user contact ELECTROMATIC’s
service facility above by telephone or fax.
– 4 –
– 13 –
Part# Type Thickness Std’s (mils) Thickness Std’s (µm)
TSF-4
Fe 1.50 2.50 4.00 38.1 63.5
101.6
TSF-20
Fe 2.00
10.00
20.00 50.8
254.0
508.0
TSN-4
NFe 1.50 2.50 4.00 38.1 63.5 101.6
TSN-7
NFe 1.50 3.00 7.00 38.1
76.2 177.8