Checkline DIS-IP - Manual (Page 2)

page 11 page 2
TORQUE MEASUREMENT TORQUE MEASUREMENT
DIMENSIONS
DIS-IP
Specifications subject to change without notice
DIMENSIONS
A B C D E F G
DIS-IP5 ∅40 40 5 ∅60 ∅50 ∅4.5 6.35
(1.57") (1.57") (.20") (2.36") (1.97") (.18") (1/4" Female Drive)
DIS-IP50 ∅50 63 10 ∅90 ∅74 ∅6.5 9.5
(1.97") (2.48") (.39") (3.54") (2.91") (.26") (3/8" Female Drive)
DIS-IP200 ∅60 72 10 ∅110 ∅90 ∅8.3 12.7
(2.36") (2.83") (.39") (4.33") (3.54") (.32") (1/2" Female Drive)
DIS-IP500 ∅80 99 15.5 ∅140 ∅116 ∅10.5 19
(3.15") (3.89") (.61") (5.51") (4.57") (.41") (3/4" Female Drive)
Digital Torque Tester
List of Equipment
Torque Tester Display Unit
Torque Sensor
Cable
AC adapter/charger
Read First: Safety Information
For safety, and for damage avoidance, be sure to read this manual
thoroughly. The warranty is only valid when the product is used
following the instructions provided within this manual.
● Do not use tester in high temperature, high humidity, or in
damp or wet areas.
● Recommended operating temperature is between 0-42ºC (32-
100ºF).
● Do not apply a torque exceeding the rated capacity, regard-
less of whether the unit is On or Off. Avoid shock load. Do
not use with impact wrenches.
● When charging the battery, be sure to use the provided AC
adapter/charger exclusively.
● When measuring torque, the unit will have a tendency to turn.
In order to avoid spinning and possible accident, it is very
important to securely mount the sensor to a stable work bench.
● Do not use lacquer thinner or any solvent to clean the unit.
● Do not disassemble or modify the unit.
Model lbf-in lbf-ft kgf-cm kgf-m N-cm N-m
DIS-IP05 0.020~4.400 — 0.020~5.000 — 0.20~50.00 —
DIS-IP5 0.20~44.00 — 0.20~50.00 — 2.0~500.0 0.020~5.000
DIS-IP50 2.0~440.0 — 2.0~500.0 — 20~5000 0.20~50.00
DIS-IP200 20~1740 2.0~145.0 — 0.20~20.00 — 2.0~200.0
DIS-IP500 20~4400 2.0~362.0 — 0.20~50.00 — 2.0~500.0
Accuracy: ±0.5% F.S., ±1 LSD
1
2
3
4
1
2
3
4