Page 3 page 10 – Checkline DIS-IP User Manual

Page 3

page 3

page 10

TORQUE MEASUREMENT

Comport signal

8 data, 2 stop, no parity. Baud Rate: 19,200 bps.

Output Connector

USB A/B cable

Peak Data Output Format

[CAN] _ _ _ [SO] [value] _ [SI] [unit] [CR]
[CAN]:

ASCII control code 24

Space (code 32)

[SO]:

ASCII control code 14

[value]:

Output data with sign and decimal point. Plus sign
represents for CW torque and minus sign for CCW.
[Value] always occupy six locations and empty
locations will be filled with spaces.

[SI]:

ASCII control code 15

[unit]:

N*m _ _ _=N.m
kgf*cm = kg.cm
lb*in _ = lb.in

[CR]:

ASCII control code 13 (Carriage Return)

Continuous Output Data Format

[CAN] [value] [CR]

POWER Press to turn on, press again to turn off (click once, do
not hold). After 10 minutes of non-use the unit shuts off.
MODE Select Real Time, PP (Peak), PD (Peak Down) or C
(Continuous Output mode)
CLEAR Reset display to zero and send data to memory
LCD display Displays torque value,
battery icon, mode & units.
Unit Select units (lbf-in, kgf-cm, N-
cm, & N-m).
GOOD/C Mode Indicator
NG Indicator
DOWN/SHIFT Change values or
numeric places
UP Change values or options
PRG/SET Enter programming mode or enter values
MEMORY Display memory locations and data
STATS Display statistics; number of records, Max, Min, and Ave
DC IN AC charger/adapter receptacle
RESET System reset button
USB port Send data to computer via USB cable

BATTERY ICON

MODE INDICATOR

MEMORY STATUS

UNITS INDICATOR

CHARGE
LIGHT