Checkline DI-1M - Manual (Page 3)

page 3 page 10
TORQUE MEASUREMENT TORQUE MEASUREMENT
ON/OFF Switch Press to turn on, press again to turn off (click
once, do not hold). After 10 minutes of non-use the unit shuts off.
Mode Select Switch
PD (Peak Down): To capture critical first peak value.
C (Real Time): To display torque transients.
PP (Peak): To capture peak torque achieved during a test.
CLEAR Switch To reset the display or output peak data
Zero Adjustment Pot.
LED Display Displays torque and low battery icon (LOBAT).
Torque Value
Number of Blows
Sensor Cable Receptacle
AC Charger/Adapter Receptacle If LOBAT icon appears,
8-hour battery recharge is required.
System Reset Button When battery has been depleted com-
pletely and a recharge has been executed, the system may not
yet work. In this case, press the System Reset Button.
Unit Switch To select measuring units (lbf-in, kgf-cm & N-cm)
USB port (Virtual RS-232 Output)
Blow Counter Duration Timer Use a paper clip to push the
switches, right to increase, left to decrease.
Auto Zero Reset Switch
1 2 3 4
5a 5b
6
7
8
9
10
12
11
1
2
3
4
5a
5
5b
6
7
8
9
10
11
12
DI-1M-IP SPECIFICATIONS
DI-1M-IP50 DI-1M-IP200 DI-1M-IP500
Measuring Range 0.30 50 N-m 3.0 200 N-m 3.0 500 N-m
3.0 500 kgf-cm 30 2000 kgf-cm 30 5000 kgf-cm
3.0 430 lbf-in 30 1800 lbf-in 30 4500 lbf-in
Peak Down 0.70N-m 7.0N-m
Operating Range 7.0kgf-cm/lbf-in 70kgf-cm/lbf-in
Accuracy ±0.5 F.S.
Display 4 digit LED
Operation Both CW and CCW
Measuring Modes P-P Peak Mode displays PEAK torque value
that will not change until a higher value is measured.
T-R Real Time Mode displays TRANSIENT torque values.
P-D Output Torque Data every 1/87 seconds.
Auto Clear Automatically zero the display, 0.5 - 3.0 sec,
selectable at 0.5 sec intervals (0.0 sec for manual)
Blow Measurement 0 - 99 blows; 0.1 - 9.9 seconds
Data Output ASCII format (baud rate 19,200)
Power Supply Ni-Cad rechargeable battery 1.2Vx5cells (700mAh)
Auto Shut Off Automatic shut off after 5 minutes of non-use
Charging Time 8 hours
Working Time 8 hours continuous
Meter Weight Approx. 600g
Sensor Weight Approx. 600g Approx. 1kg Approx. 2.5kg
Meter Dimensions 146mm(W) x 115mm(D) x 48mm(H)
Accessories Carrying case, AC/DC adapter