Checkline Series-3I - Manual (Page 2)

Model 3i Digital Force/Torque Indicator User’s Guide
1
Thank you…
Thank you for purchasing a Mark-10 Model 3i digital force / torque
indicator, designed for use with interchangeable remote force and torque
sensors. A 3i-sensor combination can be used with some Mark-10 test
stands grips, and data collection software.
With proper usage, we are confident that you will get many years of great
service with this product. Mark-10 instruments are ruggedly built for many
years of service in laboratory and industrial environments.
This User’s Guide provides setup, safety, and operation instructions.
Dimensions and specifications are also provided. For additional
information or answers to your questions, please do not hesitate to
contact us. Our technical support and engineering teams are eager to
assist you.
Before use, each person who is to use a Model 3i indicator should be fully trained in appropriate
operation and safety procedures.
TABLE OF CONTENTS
OVERVIEW .........................................................2
POWER ...............................................................4
MECHANICAL SETUP .......................................5
HOME SCREEN AND CONTROLS ...................6
OPERATING MODES .........................................8
CHANGING THE UNITS .....................................9
DIGITAL FILTERS ..............................................9
SET POINT INDICATORS ..................................9
COMMUNICATIONS ........................................10
CALIBRATION .................................................13
OTHER SETTINGS ...........................................17
SPECIFICATIONS ............................................20