Checkline QB-LED User Manual

Page 13

–12–

No.

Position of the

Selector Switch

(E)

Adjustable

Parameters

Description

Display

(7)

DIV:
1…2550

Pulse divider, max value 255.
This function is only possible when the

external trigger is selected

Pulse divider (DIV)
The pulse divider can be used to set a value x, by which the external trigger signal is then divided.
Example: when scanning a cog wheel, an external trigger (e.g. rotational speed sensor) sends our a signal

for each cog scanned. With a DIV value of 10, it will only flash once every 10 signals.

(8)

SLOW:
0…600

The flash frequency exceeds the trigger

frequency by the value selected.
This function is only possible when the

external trigger is selected

SLOW (slow motion)
The SLOW function allows the viewer to view movement in slow motion. The speed of the slow motion

depends on the flash frequency and corresponds to the value selected.

(10)

TRIG:
0 / 1

Selection of trigger signal edge

(increasing 0, decreasing 1.
This function is only possible when the

external trigger is selected

(11)

MEM IN:
1 … 5

Selected settings can be backed up in

five separate storage locations.

(11)

MEM OUT:
1 … 5

It is possible to read backed-up

settings.