Checkline PLT-5000 - Manual (Page 3)

2 .0 O V ERV I EW OF G AU GE
2.1 Gauge
Laser beam outlet
LCD display
Measuring Units display
MEM button
Stores and cycles
through readings
in memory
POWER button
Turns the gauge
on and records
measurements
2.2 Contents of Kit
Gauge
Cone adapter,
Funnel adapter,
6" circumference wheel
NIST Certificate
Operating manual,
Reflective tape (35 pieces),
Contact adapter (not shown)
Three (3) AA batteries
– 3 –
UNIT button
Selects measurement
type, either RPM or
REV
– 10 –
7 .0 S PECI FI CAT I ON S
Display 5 Digit, 0.47" (12mm)
RPM Measuring Range
Non-contact (rpm) 6.0 – 99,999
Contact (rpm) 6.0 – 20,000 (limited for safety reasons)
Surface Speed Contact only, using 6" wheel
Meter/min 1.0 – 3,809.8
Yards/min 1.0 – 4,166.4
Inches/min 36 – 99,999
Feet/min 3.0 – 12,499
Length Contact only, using 6" wheel
Meter 0.2 – 99,999
Yards 0.2 – 99,999
Feet 0.5 – 99,999
Total revolutions 1 – 99,999
Accuracy
Revolution 6.0 – 599.9 rpm ±1 rpm
Surface Speed 0.4% and ±1 digit
Length 0.4% and ±1 digit
Memory function 14 readings stored in memory & retained for 5 minutes
Update time 1 second
Detection Laser diode
Auto POWER OFF` 5 minutes
Batteries 3 AA (1.5 volt), included
Operating temp. 32–113 °F (0– 45 °C)
Construction ABS plastic
Weight
Main unit: 6 ounces. (160 g), including batteries
Contact adapter: 0.11 lb. (50 g)
Dimensions
Main unit 4.55" L x 2.52" W x 1.24" H
(115.5mm x 64mm x 31.5mm)
149mm (Length with contact adapter)
Accessories Gauge, Cone adapter, Funnel adapter, 6" circumference
wheel, NIST Certificate, Operating manual, Reflective tape
(35 pieces), Contact adapter, Three (3) AA batteries