California Faucets Single-Hole Bar/Kitchen Faucet User Manual
Page 2
CF-6209-1_ii_101217.doc
Pg
2
2
3
SUPPLY
CONNECTIONS
For Right Handed Installations
• Connect blue colored FLEX HOSE (6a) to “COLD”
SUPPLY VALVE (9a)
• Connect red colored FLEX HOSE (6b) to “HOT”
SUPPLY VALVE (9b)
IMPORTANT: Flush supply lines and valves prior to installation to prevent
damage and malfunction of cartridge
For Left Handed Installations
• Connect the blue colored FLEX HOSE (6a) to “HOT”
SUPPLY VALVE (9b)
• Connect the red colored FLEX HOSE (6b) to “COLD”
SUPPLY VALVE (9a)
MAINTENANCE
Cartridge Service
• Turn off both “HOT” and “COLD” SUPPLY VALVES (9a
& 9b)
• Unscrew HANDLE (10) and loosen SETSCREW (12).
• Slide CAP (13) off CARTRIDGE (16) stem.
• Unscrew BONNET (14), may require use of rubber jar lid
removal pad or protected jaw pliers.
• Unscrew NUT (15) from BODY (4).
• Slide CARTRIDGE (16) out of BODY (4).
• Reinstall items in reverse order. CARTRIDGE (16) has
two pins that must align into BODY (4). Ensure that O-
RING (11) is on HANDLE (10) during reassembly.
• Turn on both “HOT” and “COLD” SUPPLY VALVES (9a
& 9b)
• Check all connections for leaks and repair as necessary
NOTE: Occasionally, due to water conditions it may be necessary to
remove aerator and clean debris off with soft bristle toothbrush
www.calfaucets.com
5231 Argosy Ave. Huntington Beach, CA 92649
800-822-8855
COLD
HOT
COLD
HOT
Cold
Cold
Hot
Hot
Right Handed Installation
Left Handed Installation