Brookfield Thermosel - Manual (Page 20)

Brookfield Engineering Laboratories, Inc. Page 20 Manual No. M/94-204-I0612
APPENDIX C — DISPOSABLE SAMPLE CHAMBERS AND SPINDLES
Disposable Sample Chambers are intended for use with difficult to clean materials, or in busy
laboratories where the low cost disposable chamber may improve productivity. Also available are
disposable SC4-27D spindles for use with the Brookfield Thermosel.
The HT-2DB disposable chambers are inserted into or removed from HT-60DP or HT-60ADP
Thermo Container using the HT-116 pliers as shown in Figure C-1.
Thermocontainer HT-60DP/HT-60ADP
Extractor Pliers
HT-116
Disposable Sample
Chamber HT-2DB
SC4 Series
Thermosel Spindle
Figure C-1
Replacement disposable chambers are available in packages of 100 chambers (Brookfield Part Number
HT-2DB-100). Contact Brookfield or your Brookfield agent for pricing and delivery information.
A package of five disposable aluminum sample chambers (Brookfield Part Number HT-2DB)
and one pair of extraction pliers (Brookfield Part Number HT-116) are supplied with each new
Thermosel System.
Disposable Spindle Instructions (see Figure C-2)
1. Loosen closer.
2. Slide disposable spindle into chuck to insertion mark.
3. Hold chuck and hand-tighten closer.
4. Attach the assembly (spindle and chuck) to the viscometer being careful to hold the pointer
shaft firmly and lift up slightly.