Brookfield UL Adapter, Enhanced User Manual
Enhanced ul adapter
Brookfield Engineering Laboratories Inc.
- -
Operating Instructions M06-084-A0507
B R O O K F I E L D E N G I N E E R I N G L A B O R ATO R I E S , I N C .
Commerce Boulevard • Middleboro, MA 046 USA
ISO9001 CERTIFIED
T
E L
508-946-600 or 800-68-89 F
A X
5 0 8 - 9 4 6 - 6 6
w w w . b r o o k f i e l d e n g i n e e r i n g . c o m
Boston • Chicago • London • Stuttgart • Guangzhou
Enhanced UL Adapter
Assembly & Operating Instructions
No. M06-084
The Enhanced UL Adapter, shown in Figure 1, is a kit consisting of a spindle with coupling nut attached, sample
chamber, mounting channel, and water jacket with mounting collar. It is available in two versions: (1) with type
304 stainless steel suitable for most general purpose applications; (2) with type 316 stainless steel for use with
corrosive/acidic applications. All versions are shipped with the water jacket (ULA-49EAY) mounted on the
sample chamber.
The type 304 s/s UL Adapter (Part No. ULA-EY) may be used either as an “open tube” or “closed tube” system.
In the “open tube” method, the water jacket (ULA-49EAY) must be removed, allowing measurement in a beaker
or other suitable vessel. In the “closed tube” method, the sample is poured into the sample chamber with tube end
cap installed, which may be temperature controlled by direct immersion into a water bath or with the use of the
water jacket connected to a circulating water bath. The 316 s/s UL Adapter (Part No. ULA-EZY) has a closed
sample chamber with solid bottom and cannot be used as an open tube configuration.
The Enhanced UL Adapter may be ordered without the water jacket (Part No ULA-E). Check your sales order to
verify that you have received the correct configuration for your Enhanced UL Adapter.
PIVOT CUP,
BR-3
(PART OF
LAB VISCOMETER)
ULA-E SPINDLE
WITH COUPLING NUT,
YULA-15E -304 SS
YULA-15EZ-316 SS
MOUNTING
CHANNEL,
ULA-10E
MOUNTING
SCREW,
HT-99
CLAMPING
KNOB,
ULA-05EY
TUBE END CAP,
ULA-34
(NOT REQ’D WITH ULA-31EYZ
SAMPLE CHAMBER)
SAMPLE CHAMBER,
ULA-31EY
(304 s/s, open tube)
ULA-31EYZ
(316s/s, closed tube)
CLAMPING
COLLAR,
ULA-02E
WATER JACKET with
MOUNTING COLLAR,
ULA-49EAY
CONICAL PORTION
OF SHAFT
PIN
Figure 1: Enhanced UL Adapter Assembly