Aviom A-16II - Manual (Page 37)

29 A-16ii P
ersonAl
M
ixer
U
ser
G
Uide
To save a Preset, hold Recall and Group simultaneously and then press a channel button.
All 16 channel LEDs flash to indicate a successful Preset save.
Verify a Mix Memory Location
When creating and editing mix Presets, it is useful to know which Preset was the last one to be stored in
order to avoid overwriting Presets accidentally. When preparing to save a mix in the A-16II, the software will
display the last mix Preset that was recalled when the R
ecall
and G
ROup
buttons are held simultaneously.
The red LED in the channel button that corresponds to the last recalled Preset will light as long as these
two buttons are held.
P N
Ote
: Remember to save your new mix to a memory location before turning the monitoring
system off.